Page 56 - Suttner Product Catalog - 2025-2026

NOZZLES: HYDRO EXCAVATION

NEW! 8° TURBO NOZZLES (stainless steel)
ORDER # PRESSURE TEMP. ORIFICE INLET WEIGHT
200556512 6000 PSI 190° F 10.0 1/2" FPT 1.0 lb
6000 PSI 200556582 6000 PSI 190° F 8.0 1/2" FPT 1.0 lb

• 8° spray angle.
• Extremely aggressive jet.
• Length: 6 inches.
• Chemical resistant housing.
• Ideal for hydro excavating.
• Also available with a cover #200556599.
• Increases cleaning efficiency as much as 200%.
• The 0° rotation creates a cleaning and tearing action.
ALWAYS START TURBO • Ideal for hard surfaces.
NOZZLE IN A
DOWNWARD POSITION. • Improved materials for a longer life.
THE USE OF A TURBO • Tungsten carbide nozzle and sealing seat.
STRAINER IS
RECOMMENDED FOR ALL
TURBO NOZZLES.

ST-457H TURBO NOZZLES
6000 PSI ORDER # PRESSURE TEMP. ORIFICE INLET WEIGHT REPAIR KIT

200457730 6000 PSI 212° F 3.0 1/2" FPT 1.48 lb 200457130
200457735 6000 PSI 212° F 3.5 1/2" FPT 1.48 lb 200457135
200457745 6000 PSI 212° F 4.5 1/2" FPT 1.48 lb 200457145
200457750 6000 PSI 212° F 5.0 1/2" FPT 1.48 lb 200457150
200457755 6000 PSI 212° F 5.5 1/2" FPT 1.48 lb 200457155
200457760 6000 PSI 212° F 6.0 1/2" FPT 1.48 lb 200457160
200457770 6000 PSI 212° F 7.0 1/2" FPT 1.48 lb 200457170
200457780 6000 PSI 212° F 8.0 1/2" FPT 1.48 lb 200457180
200457790 6000 PSI 212° F 9.0 1/2" FPT 1.48 lb 200457190
ALWAYS START TURBO 200457710 6000 PSI 212° F 10.0 1/2" FPT 1.48 lb 200457110
NOZZLE IN A
DOWNWARD POSITION. • Increases cleaning efficiency as much as 200%.
THE USE OF A TURBO • The 0° rotation creates a cleaning and tearing action.
STRAINER IS
RECOMMENDED FOR ALL • Ideal for hard surfaces.
TURBO NOZZLES. • Minimum 1000 PSI.
• Ideal for hard surfaces.
• Improved materials for a longer life.
• Ideal for hydro excavating.
• Orifice size stamped on inlet nut.
20° spray angle
• Box quantity: 20.

rotating spray pattern

/
56 SUTTNER AMERICA COMPANY