Page 141 - Suttner Product Catalog - 2023

Pressure Washer Accessories: Sludge Pump

ST-36 SLUDGE PUMP (high output)
Attaches to pressure washer and turns it into a high output pump.
Great for flood cleanup, car wash pits, draining pools or chemical spills.

ORDER # 15 ft ORDER # 25 ft INLET ORIFICE
999QC1530 — 1/4" M Q.C. 3.0 (0°)
999QC1540 999QC2540 1/4" M Q.C. 4.0 (0°)
999QC1545 999QC2545 1/4" M Q.C. 4.5 (0°)
999QC1550 999QC2550 1/4" M Q.C. 5.0 (0°)
999QC1555 999QC2555 1/4" M Q.C. 5.5 (0°)
999QC1560 999QC2560 1/4" M Q.C. 6.0 (0°)
999QC1570 — 1/4" M Q.C. 7.0 (0°) M22 Screw Nipple
999QC1580 — 1/4" M Q.C. 8.0 (0°)
999001540 999002540 M22 4.0 (0°)
999001545 999002545 M22 4.5 (0°)
999001550 999002550 M22 5.0 (0°)
999001555 999002555 M22 5.5 (0°)
999001560 999002560 M22 6.0 (0°) 1/4” Q.C. Plug
PRESSURE FLOW RATE TEMP.
4000 PSI 11:1 104° F

• Vacuums up liquids and sludge at a high ratio
*Approximate ratio of 11:1 based on clean water. Ratio
will vary depending on pressure, flow and viscosity
• Water flowing through the high pressure nozzle creates a Casting assembly w/ hose barb
#200036500
powerful venturi suction that vacuums up slurry solutions (without nipple and nozzle)
• Great for flood clean up, car wash pits, emptying pools or chemical pits
• Debris as large as 3/4” will pass through the casting and
Scan QR code to
out the discharge hose watch a short demo
• Cleans up solutions/mixtures without pump damage
• Acts like a sump or trash pump m/watch?v=tXsMN9TzVI
https://www.youtube.co
• Hose barb 1 1/2” I&feature=youtu.be
• Weight of hose is 8-10 lbs (depending on hose length)

SUTTNER AMERICA COMPANY 141